SADCC-100 - 100" Dry Contact Cable Simple Type: TBD
Request Quote
For Price
- Part Number:
- SADCC-100
- Model Number:
- SADCC-100
- Make:
- UPTIME DEVICES
- Lead Time:
- Available
- Qty In Stock:
- Available
100" Dry Contact Cable Simple Type: TBD
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- A/D Conversion Time: 280uSec.
- A/D Converter Accuracy: ±2 LSB.
- A/D Converters: Four 10-bit A/D converters. Each A/D is a successive approximation ADC. The ADC contains a sample and hold amplifier, which ensures that the input voltage to the ADC is held to a const
- A/D Integral Non-Linearity: 0.5 LSB.
- Communications Cable: RJ-45 to sensor using 15, 60, or 100 foot Helix High Temperature Cable, Maximum extension cable length 305m (1000 ft.) with approved low capacitance shielded cable or UTP.
- Input: Every switch has a pull-up resistor settable under snmp control. When used as an input the internal pull-up resistor can be turned on and a normal state configured. The input pin can then sense
- Measurement Range: Alarm/ Normal.
- Measurement Rate: One reading each second.
- Output: Every pin can sink 20mA.
- Reboot: All settings are saved to EPROM memory. During the reboot period all I/O pins are tristate until they are set to their previous value under program control. All spurious signals are disabled d
- Sensor Disconnection Detection: Yes, using second contact.
- Sensor Power: Onboard dry contact relays, no power required.
- Trap Information: Alarm- Sensor Number, Sensor Description, Error/Normal.
Specifications
Applications
- None Available
Aliases
- None Available