SADCC - 15" Dry Contact Cable

SADCC - 15" Dry Contact Cable Simple Type: TBD

15" Dry Contact Cable Simple Type: TBD

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

A/D Conversion Time: 280uSec.
A/D Converter Accuracy: ±2 LSB.
A/D Converters: Four 10-bit A/D converters. Each A/D is a successive approximation ADC. The ADC contains a sample and hold amplifier, which ensures that the input voltage to the ADC is held to a const
A/D Integral Non-Linearity: 0.5 LSB.
Communications Cable: RJ-45 to sensor using 15, 60, or 100 foot Helix High Temperature Cable, Maximum extension cable length 305m (1000 ft.) with approved low capacitance shielded cable or UTP.
Input: Every switch has a pull-up resistor settable under snmp control. When used as an input the internal pull-up resistor can be turned on and a normal state configured. The input pin can then sense
Measurement Range: Alarm/ Normal.
Measurement Rate: One reading each second.
Output: Every pin can sink 20mA.
Reboot: All settings are saved to EPROM memory. During the reboot period all I/O pins are tristate until they are set to their previous value under program control. All spurious signals are disabled d
Sensor Disconnection Detection: Yes, using second contact.
Sensor Power: Onboard dry contact relays, no power required.
Trap Information: Alarm- Sensor Number, Sensor Description, Error/Normal.